Precautions for terminal mold design of stamping terminal products
- Categories:Company News
- Author:
- Origin:
- Time of issue:2021-04-17 16:37
- Views:
1. When designing the layout of the terminal mold, save materials as much as possible. In general, the pitch product of the strip or the customer has been determined and cannot be changed. Therefore, considering the material width, it can be single material double row, double material double insert In order to improve the utilization rate of materials
2. When designing the mold, perform multiple processes in the same step as much as possible, reduce the length of the mold as much as possible, and eliminate the cumulative error caused by the processing accuracy
3. For the strict requirements on the bending angle/size, as much as possible There are adjustment steps, and only need to be adjusted on the punch without disassembling the mold during adjustment.
4. In general, it is necessary to increase the stamping speed and dimensional stability, reduce the cost of a single product, and the cost of the terminal product. The profit of a single product is relatively low, and the overall profit is increased by high production. The adjustment of the tie deformation of the terminal mold When designing, assembling and repairing the terminal mold, the tie deformation is a very important content. The tie deformation includes: There are three types of scimitar, twisted lace, and twisted lace. In fact, the laced snake is the comprehensive English of the scimitar and twist (Cabriole, Twist and Snake). There are three types of adjustments for the scimitar (Cabriole), one is not. Let it appear, and press it where it appears. Second, it will be reversed immediately after it appears. The third is to adjust the pressure when the strip is about to exit the mold, so that it deforms to offset the scimitar.
Guangdong Xinpei Connector Co., Ltd. is a professional manufacturer of electronic connectors. HRT, Xin Pei, Xin Pei Plastic, Xin Pei Electronics, Dongguan connectors, connector suppliers, stamping terminals, products are mainly used in household appliances, computer peripherals, medical equipment, locomotives, communications and other fields.
相关新闻
- Precautions for terminal mold design of stamping terminal products 2021-04-17
- What should I pay attention to when stamping connector terminals? 2021-04-16
- Introduction to the stamping process characteristics of precision metal stamping parts 2021-04-16
- Mechanical properties of the connector 2021-04-16
- Plastic mold processing technology 2021-04-16
Contact
ADD : No. 3-102, Dongyuan 2nd Road, Lianhu Second Industrial Zone, Tangxia Town, Dongguan City
TEL : 86-769-82109962 / 82616722
FAX : 86-769-87938478
CONTACT : Mr. Zou(13925717990)
Mr. Liu(18098239849)
EMAIL : Mr. Zou zlr@dgxinpei.com
Mr. Liu 808@dgxinpei.com
copyright © 2021 Guangdong Xinpei Connector Co., Ltd. 粤ICP备18114837号 Support: 300.cn Dongguan